Flextein TG802

立即咨询资料下载

Flextein TG802

NYSTEIN Thermal Gel Flextein ® TG802

Flextein TG802 is special designed for use in high performance devices requiring minimal thermal resistance for maximum thermal performance and component reliability. It requires no cure cycle and can be readily re-worked. This compliant material requires low compression force to conform over irregular interfaces and can be applied to single devices with minimum bond-line thickness as well as to multiple devices with variable tolerances. The cross-linked gel structure provides superior long term thermal stability and reliable performance over conventional greases.

Features & Benefits

l Thermal conductivity 2.0 W/m · K

l Ultra low thermal resistance

l Easy to dispense

l Ultra low compression force

l Long-term reliability

l RoHS compliant

Typical Properties:

Property	Unit	Parameter	Test Method
Appearance	— —	Dark Gray	Visual
Min. Used Thickness	mm	0.1	ASTM D374
Extrusion rate	g/min	30	Nystein
Thermal Conductivity	W/m · K	2.0	ISO 22007-2
Density	g/cm³	2.6	ASTM D792
Thermal Resistance	@50 psi °C·in²/W	0.055	ASTM D5470
Dielectric Strength	kV/mm	≥6.0	ASTM D149
Volume Resistivity	Ω ·cm	≥ 1.0 × 10¹²	ASTM D257
Service Temp	°C	-40 to 150	Nystein
Flame Rating	——	V-0	94 UL
RoHS	——	Yes	Nystein

Typical Application

l Computers and servers and their peripherals

l Smartphone, Tablet Multimedia

l High-end network equipment

l Optical Communication Modules

Configuration Available

l 30cc, 55cc, 300cc Syringe.

l 1kg, 10kg pail.

l Standard sheet size 230×230 mm, thickness 0.50 ~8.0 mm selectable

Storage conditions

l Sealed at room temperature away from light, and stored in a dry place.

l Best storage conditions: Temperature: 25℃ ( ±3), Humidity: 50% ( ±10), can be stored for 12 months.

l The materials taken out after opening may be contaminated during use, so please do notmix contaminated products with unopened products.Kleber assumes no responsibily for contaminated products or conditions other than the required storage conditions.

l For additional information, please contact your appropriate sales, technical support, orcustomer service representative promptly.